Accessories

Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Easily attaches to your trailer to keep it from tipping down when not attached to your hitch. - Conveniently attaches to the tongue and keeps your trailer level when un-hitched Product Specs: - Weight: 2.20 lbs. - Limited One Year Warranty

Need to carry more weight? Increases your 78" trailer load rating to 350lbs. Note: Do NOT carry over 250 lbs. on the 66" Crossbars, even with Heavy Duty shocks. - Upgrade the capacity of the 78" Trailers from 250 lbs to 350 lbs - Not for use with the 66" RACKandROLL trailer Product Specs: - Weight: 6.90 lbs. - Limited One Year Warranty

Be prepared with this spare tire and wheel designed for all RACKandROLL trailers. The spare features a black hubcap and all mounting hardware needed. Keep the road trip alive and well. - Spare tire and wheel for Yakima RACKandROLL trailers - Includes a black hubcap and mounting hardware Product Specs: - Weight: 16.31 lbs. - Dimensions: L 23.00 in x W 3.25 in x H 16.00 in - Limited One Year Warranty

For the couple that loves to bike together, there's the SideWinder. Featuring a swing-out arm allowing one person to load a tandem bike with ease. Fork-mount style that won't interfere with most hatchbacks. Fits Yakima round or square crossbars only. - Swing-out arm allows one person to easily load a bicycle built for two - Simple, tool-free installation - Won't interfere with most hatchbacks - Padded cradle and quick-release straps protect bottom-mounted cables - Fits Yakima round or square crossbars - SKS Locks sold separately - One tandem bicycle up to 50 lbs at min of 24" crossbar spread Product Specs: - Weight: 18.50 lbs. - Dimensions: L 56.00 in x W 8.00 in x H 12.00 in - Minimum Crossbar Spread 24.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty

Turn your 66" trailer into a 78" trailer. Widen your 66" wheel track and Crossbars by 13" with this kit. With 78" Crossbars you can carry wider loads, such as two 36-inch beam canoes or up to seven kayaks. - Upgrade your RACKandROLL 66" trailer to a 78" trailer - Comes with two 78" Crossmembers and two 78" Yakima Crossbars Product Specs: - Weight: 17.31 lbs. - Limited One Year Warranty

Never be forced to choose between your favorite activities and gear. Maximize your gear hauling choices by adding a sturdy, lightweight trailer. The RACKandROLL trailer is made of lightweight aluminum and offers a stable, secure ride for all your gear. Stores easily upright in the off-season. - Lightweight aluminum construction - Shock absorbers provide 4" of independent wheel travel, providing greater stability and gear protection - Stores easily in compact upright position with removable wheels and tongue - Small wheels on rear of trailer allow you to easily roll the trailer upright for storage - Carrying capacity is 250 lbs with stock suspension. - Carrying handle transforms lightweight trailer into a handcart - Includes Yakima crossbars; spread adjustable to 48" - LED trailer lights last years without needing replacement Product Specs: - Weight: 150.00 lbs. - Dimensions: L 132.00 in x W 66.00 in x H 22.00 in - Limited One Year Warranty

Never be forced to choose between your favorite activities and gear. Maximize your gear hauling choices by adding a sturdy, lightweight trailer. The RACKandROLL trailer is made of lightweight aluminum and offers a stable, secure ride for all your gear. Stores easily upright in the off-season. - Lightweight aluminum construction - Shock absorbers provide 4" of independent wheel travel, providing greater stability and gear protection - Stores easily in compact upright position with removable wheels and tongue - Small wheels on rear of trailer allow you to easily roll the trailer upright for storage - Carrying capacity is 250 lbs with stock suspension. - Optional Heavy-Duty Shocks can carry up to 350 lbs (RACKandROLL 78" only) - Carrying handle transforms lightweight trailer into a handcart - Includes Yakima crossbars; spread adjustable to 48" - LED trailer lights last years without needing replacement Product Specs: - Weight: 160.00 lbs. - Dimensions: L 132.00 in x W 78.00 in x H 22.00 in - Limited One Year Warranty

- Add to older versions of the SuperStand to extend height to accept 29er wheels

Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.

This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

- Includes basket holder - Carrying handle for off bike use - Polyester powder coating - 11.75" x 8" x 9"

One of the best selling items in Wald's entire catalog, this basket set the precedent for quick-release convenience and is perfect for carrying small bags of groceries. - Made in U.S.A. (Maysville, KY) - This Quick Release Baskets comes with a detachable Slip-on Holder for simple installation - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14 x 9.5 x 9 inches; the basket tapers to 12.25 x x 7 inches - Holder is designed to fit 7/8" handlebar, hooks are 4 1/2" apart - Available in white (133WH) or black (133GB) Powder Coat Finish - Complete basket including the holder weighs 2.4 lbs.

The Wald 582 sets the standard for ingenuity when it comes to rear baskets. Mounting to the side of many rear racks, this nimble basket is the perfect size for packing 1-2 bags of groceries while balancing your load. When not in use, the base of the basket pivots up allowing the side walls to collapse. A simple clamp at the top keeps the basket out of your way when not in use. - Made in U.S.A. (Maysville, KY) - Baskets clamp to most rear racks up to 1/2" diameter - When not in use the base of the basket pivots up allowing the side walls to collapse making the collapsed basket 1" thick - A simple clamp at the top keeps the basket out of your way when collapsed - Extended basket is 12 3/4" front to back x 7 1/4" side to side x 8 1/2" deep - 582 Baskets have a Zinc Plated Finish; 582BL and 582WH Baskets have a Powder Coat Finish - Complete basket weighs 2.8 lbs.

This versatile basket is the most adaptable front basket Wald offers. - Made in U.S.A. (Maysville, KY) - Deep basket that is sized for a grocery sack - Dimensions: 14.5 x 9.5 x 9 inches; basket tapers to 12.25 x 7 inches - Extended handlebar clamps fit 7/8" and 1" diameter handlebars - Two-piece adjustable legs extend from approx. 14 inches to 22 inches and mount to either the front axle or fork eyelets for bikes with quick release front hubs - Available in gloss black (198GB) or white (198WH) Powder Coat Finish - Complete basket weighs 3 lbs.

This front basket system uses a bolt-on handlebar mount to allow for quick and easy removal of the basket itself. - Extended handlebar clamps allow greater clearance for shift and brake cables - Requires 3.5" of handlebar clearance for mount - Fits 7/8" to 31.8mm handlebars - Made in USA - Dimensions: 11.75 x 8 x 9"

- Steel wheels - For riders up to 100lbs - Fits 12" - 20" wheel bikes

Material: premium chrome vanadium steel

- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.

- 15 mm opening is laser cut with precision and perfect angle to help you loosen the pedals as easy as possible - 270mm of length for extra leverage - Small and light weight, perfect for toolbox and traveling

- Blade chrome plated, black anodised tip - Handle – polypropylene

- The wrench is used for tightening and unscrewing screws with 4, 5, and 6mm hex-shaped nut

The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.

Three most popular TORX sizes: T10, T15 and T25mm

- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 - Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result

- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.

- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.